Function Settings - MUTOH Falcon Outdoor 46 User Manual

Function Settings

Ink Dry Time
Ink drying times differ according to the type of media. After
the printing is finished, roll media is cut off and falls into the
ejected media basket. If the ink is not yet dry, the media will
be soiled. Ink drying time is the delay to allow the ink to dry
between the end of printing and the cutting of the roll media.
• Ink drying time: 0 sec, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec,
50 sec, 60 sec, 90 sec, 120 sec, 150 sec, 180
sec, 210 sec, 240 sec, 270 sec, 300 sec, 6M,
7M, 8M, 9M, 10M, 15M, 20M, 25M, 30M, 35M,
40M, 45M, 50M, 55M, 60M.
Halftone
This specifies the method for expressing pseudo-halftone pro-
cessing of MH-GL/2 (vector) data or unbinarized MH-RTL
(raster) data.
• Speed diffusion:
• Quality diffusion:
• Thin diffusion:
CMY -> Black
Specifies whether black is to be expressed by CMY (mixture)
or K.
In graphic language mode, it appears as follows:
RTL-PASS Black must be K ink CMY black may be
MH-GL/MH-GL2 Black must be K ink Black must be CMY
Scale
This function prints with expanded or reduced printing data
• 25% to 100% to 400% (in 1% steps)
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Understanding the Functions
Name of Function
Rapid expression of tones with an
error diffusion matrix
High quality expression of tones by
mean error minimization
Try this if the data was prepared for
another brand of printer and high
speed diffusion appears too dense.
Yes
mixed with K
mixed
Function Settings
Reference
Page
Page 122
Page 124
Page 125
No
Page 126
103