Table of Contents
Advertisement
Loading the Ink Cartridges
Important:
· Before using Eco-Solvent ink, perform a head wash. Tubes, heads
· Once you have worked with eco-solvent inks, it is forbidden to change
A. Going to use Eco-Solvent ink.
If you are going to use Eco-Solvent ink, please perform a head wash. Use the special
Eco-Solvent Transition Liquid.
If you are not going to use Eco-Solvent ink, but Dye or Pigmented Ink, go to point "B.
Installing Ink Cassettes".
Step 1:
The power switch is located at the right side of the printer,
below the printer body.
Turn the switch ON and put the hold lever in the DOWN
position.
Step 2:
The printer starts up its initialization routine and the printer display shows the following
message:
[Y M C K O G] No cartridge
Y: Yellow
M: Magenta
C: Cyan
K: Black
O: Orange or Light Cyan
G: Green or Light Magenta
40
and filters must be clean. Use the special Eco-solvent Transition
Liquid.
to another ink type.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Advertisement
Table of Contents
