NOTE
• If values other than those set at the time of shipping from
Mutoh are used, be sure to refer to "Centronics Settings" on
page 136 or "Network Settings" on page 138.
Command Set-up (User Settings)
Each user will specify the online commands from the computer and the com-
mand conditions.
Commands
The type of command for verification is the MH-GL system (MH-GL/GL2, MH-
GL2, RTL-PASS).
MH-GL system commands (emulation of Hewlett-Packard printer com-
mands)
Settings at the time of shipping by Mutoh
Command
Item
Initial position
P1
Terminator
Normal
Resolution
360 dpi
NOTE
• If values other than those set at the time of shipping from
Mutoh are used, be sure to refer to "Command Settings" on
page 113.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
To Receive Data from the Computer
Command Set-up (User Settings)
69