Making A Test Print And A Setup List Print - MUTOH Falcon Outdoor 46 User Manual

Making a Test Print and a Setup List Print

These are prints of the current status of the printer. Check by printing out the
following two types of print.
Test print: This checks whether the printer is fully operational by making a
print.
Setup List print: This prints out details such as printer online settings.
NOTE
• It is useful to keep the Test print and Setup List print in this
book in case trouble occurs later. Keep the Test print on page
66 and the Setup List print on page 70.
Step 1
Load an A3 size sheet of media and put the hold lever down.
Step 2
For the test print, press the [Test Print] key (Quality/speed key) while you
are pressing the [Shift] key.
For the Setting details print, press the [Setup Print] key (VACUUM key)
while you are pressing the [Shift] key.
Step 3
The Test print or Setup List print are output automatically.
Sample of
Setup List
print
80 Falcon Outdoor 46/62 USER GUIDE (AP-75046)