Loading the Media
Loading Roll Media
Loading media in combination with
the Roll Take-Up System.
Step 1 :
Open the cover and put the hold lever in the UP position by tilting it up(wards).
Step 2 : Selecting roll take-up system
·
Press the Media-key to select
media loading sequence with roll
take-up system (Both LEDs ON).
·
By pressing the key you will see the
LEDs alternate between three
choices (sheet, roll and take-up).
Now select roll take-up loading
sequence (both LEDs ON).
Step 3 :
Take an empty cardboard core. Slide the empty cardboard roll over the scroller of the roll
take-up system.
Note :
Notice that one flange is fixed. A warning sticker is attached near the
flange. Do not remove this flange.
58
Falcon Outdoor 46/62 USER GUIDE (AP-75046)