Making A Test Print - MUTOH Falcon Outdoor 46 User Manual

Making a Test Print

Make a test print to verify that the printer is working properly.
Step 1
Open the cover and check that the hold lever is up.
Step 2
Press the [MEDIA] key to light the Sheet media LED. (Cut media is selected)
Step 3
Load an A3 size sheet of cut media and
put the hold lever down.
Step 4
After initialization has finished, press
the [Test Print] key (Quality/speed,
key) while you are pressing the
[shift] key. (Test print: pale blue)
Test print sample (paste your test print on this page)
66 Falcon Outdoor 46/62 USER GUIDE (AP-75046)
P l o t O K
P r i n t i n g
NOTE
• If you are unable to
make a test print like
the above sample,
contact your local
Mutoh dealer.