Assembling the Stand
Caution:
· Before lifting the printer body out of the box, make sure to remove all
Step 1:
Unpack the stand and assemble it by screwing the left and right stand legs to the cross
beam (upper bar)(1) and to the cross bar (lower bar)(2). To do this, use the 4 long
hexagon bolts and the large hex wrench provided to secure the cross beam (1), and 2 long
hexagon bolts to secure the cross bar (2). Make sure the caster wheels are on the front.
After securing the bolts permanently, put on the two plastic side covers.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
plastic wrapping materials first, in order to avoid that the machine slips
from your hands.
29