Terminator - MUTOH Falcon Outdoor 46 User Manual

Command Settings: Terminator
P l o t O K
* M e n u * C o m m a n d >
* M e n u * C o m m a n d >
C o m m a n d : M H G L , G L 2
T e r m i n a t : S p e c i a l
T e r m i n a t :
R e s o l u t . :
* M e n u * C o m m a n d >
P l o t O K
116
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Command" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Command" menu and shift to the next
level.
Step 4
Bring up the "Terminat" item by press-
ing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to select "Special" or "Normal".
Step 6
Press the [ENTER] key to confirm
N o r m a l
"Terminat" and shift to the next item to
be set.
Step 7
If no other items are to be changed,
3 6 0 d p i
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)