Messaged Errors And Countermeasures - MUTOH Falcon Outdoor 46 User Manual

Messaged Errors and Countermeasures

A messaged error impedes the operation of the printer. Sometimes an error is
displayed and printing continues or printing may cease when an error is dis-
played. If printing stops, it will be reprinted when the cause of the error is
removed.
When a messaged error occurs, the beeper will beep twice unless there is
insufficient memory.
Capping position not set
N o C a p P o s i t i o n
Media recognition error
U n d e f i n e d
Media skew error
P a p e r S l a n t
Media replacement error
P a p e r C u t
174
The capping position is not recorded.
The error will not be cancelled until the
capping position is adjusted. Contact
your local Mutoh dealer regarding cap-
ping position adjustment.
An error has occurred during media
P a p e r
detection.
Either media smaller than the minimum
size or larger than the maximum size
was detected or the hold lever was up
or a media jam occurred during media
detection. This error also occurs if the
media is not loaded in the correct posi-
tion. Put the hold lever up and reload
the media.
Roll media has slipped obliquely.
Reload the media.
Roll media cutting failed. Cut the
E r r o r
media, raise the hold lever and reload
the media.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)