Media Jams Occur Frequently; Roll Paper Is Not Cut Cleanly - MUTOH Falcon Outdoor 46 User Manual

When Trouble Strikes
#It prints but the position is not right (there are places that
cannot be printed)
Possible Cause
(1) Is the media loaded in the
right position?
(2) Have you made scale or
mirror settings?
(3) Is an initial position speci-
fied?
(4) Is the printing abnormal
after ink was filled?

#Media jams occur frequently

NOTE
• If the media is not media specified by Mutoh, proper media
feeding can not be guaranteed.
Possible Cause
(1) Are you using media spec-
ified by Mutoh?
(2) Is your usage environ-
ment other than that spec-
ified?
(3) Are you using old media?
(4) Is the media creased or
wrinkled?

#Roll paper is not cut cleanly

Possible Cause
(1) Is the cutter sharp?
(2) Is the media charged with
static electricity?
(3) Are you using cloth?
204
Load media correctly.
Cancel scale and mirror set-
tings or repeat the set-up.
Cancel initial position setting
or repeat the set-up
Leave for 24 hours after ink
filling and try printing again
Use media specified by Mutoh.
Use in the specified environ-
ment.
Replace with new media.
Replace with new media.
Replace cutter.
Remove static charge.
Cut cloth manually.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Remedy
Remedy
Remedy
Reference
Page
Page 48
Page 126
and 127
Page 122
Page 38
Reference
Page
Page 48
Page 18
Page 48
Page 48
Reference
Page
Page 196
Page 71