Cut Position - MUTOH Falcon Outdoor 46 User Manual

Function Settings: Cut Position
P l o t O K
* M e n u * C o m m a n d >
* M e n u * F u n c t i o n >
I n k D r y T i m e :
C u t P o s . :
C u t P o s . : S t a n d a r d
M e d i a C u t :
* M e n u * F u n c t i o n >
P l o t O K
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Function" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Function" menu and shift to the next
level.
Step 4
Bring up the "Cut Pos." item by press-
3 0 s
ing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
D a t a
to specify "Data" or "Standard".
Step 6
Press the [ENTER] key to confirm "Cut
Position" and shift to the next item to
be set.
Step 7
If no other items are to be changed,
A u t o
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
129