Loading the Media
Loading Roll Media
Loading Roll Media
Step 1:
Open the cover, check that the head is in a position where it will not touch the media
keeper blade and put the hold lever up.
Step 2: Selecting the media
· Press the [Media] key to select between cut-sheet or
roll media.
· By pressing the key you will see the LED alternate
between the two choices. Now select roll.
Note :
When making the wrong choice by selecting cut-sheet when a roll is
loaded, the printer will pull off the maximum cut-sheet length, searching
the back edge. Finally the printer will report a media search error.
Step 3:
Take your roll of media.
Step 4:
Remove the movable flange from the scroller by
pulling it off.
52
Falcon Outdoor 46/62 USER GUIDE (AP-75046)