Command Settings - MUTOH Falcon Outdoor 46 User Manual

Command Settings: Command
P l o t O K
* M e n u * C o m m a n d >
* M e n u * C o m m a n d >
C o m m a n d : M H G L , G L 2
C o m m a n d : R T L - P A S S
P l o t A r e a :
* M e n u * C o m m a n d >
P l o t O K
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Command" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Display a Command item by pressing
the [Menu Up] key or [Menu Down]
key.
Step 4
Specify "MHGL, GL2", "MH-GL2" or
"RTL-PASS" by pressing the [VALUE +]
or [VALUE -] key.
Step 5
Press the [ENTER] key to confirm
"Command" setting and shift to the
next item to be set.
Step 6
If no other items are to be changed,
N o r m a l
press the [Back] key.
Step 7
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 8
The permanent display is restored.
113