Table of Contents
Advertisement
Position
In the case of MH-GL, GL2 (MH-RTL) and MH-GL/2 (MH-RTL),
this specifies the initial pen position in printer commands.
• P1:
The initial position is P1 (scaling point)
• LL:
The initial position is at the lower left of the hardclip.
• Full: The initial position is at the lower left of the media.
Terminator
In the case of MH-GL, GL2 (MH-RTL) and MH-GL/2 (MH-RTL),
this specifies a function that is different from the original
command function as the terminator with respect to some
commands in each of the printer's command modes.
• Normal: Only the original command is used
• Special: Recognizes end of data as the terminator SP0; (SP;)
Resolution
In the case of MH-GL, GL2 (MH-RTL) and MH-GL/2 (MH-RTL),
this specifies the resolution for image data in MH-RTL com-
mands.
• 300 dpi: Sets image data resolution to 300 dpi
• 360 dpi: Sets image data resolution to 360 dpi
• 720 dpi: Sets image data resolution to 720 dpi
Online Timer
When online data is broken off, this specifies a certain period
of time, the elapsing of which is taken to be the end of image
data.
• Online timeout: Off, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60
sec, 90 sec, 120 sec, 150 sec, 180 sec, 210
sec then in 30-sec increments to 720 sec,
750 sec, 780 sec, 800 sec.
Overwrite
This specifies functions related to the printer's own environ-
ment. Specifies the method for controlling the overwritten por-
tions of a diagram.
• Last: Overwritten portion takes a colour to be printed later
• Mix: Overwritten portion takes mixed colours
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Understanding the Functions
Name of Function
Command Settings
Reference
Page
Page 115
Page 116
Page 117
Page 118
Page 120
101
Advertisement
Table of Contents
