Plot Area - MUTOH Falcon Outdoor 46 User Manual

Command Settings: Plot Area
P l o t O K
* M e n u * C o m m a n d >
* M e n u * C o m m a n d >
C o m m a n d : M H G L , G L 2
P l o t A r e a :
P l o t A r e a :
P o s i t i o n :
* M e n u * C o m m a n d >
P l o t O K
114
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Command" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Command" menu and shift to the next
level.
Step 4
Bring up the "Plot Area" item by press-
ing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
N o r m a l
to select "Normal" or "Expand".
Step 6
Press the [ENTER] key to confirm
E x p a n d
"Plot Area" and shift to the next item to
be set.
Step 7
If no other items are to be changed,
P 1
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Falcon Outdoor 46/62 USER GUIDE (AP-75046)