Specifying The Media To Be Used - MUTOH Falcon Outdoor 46 User Manual

Specifying the Media to be Used

Here we select whether we will use roll media or cut media as the media to be
loaded in the Falcon Outdoor printer.
For cut media
IMPORTANT
• If roll media is loaded while cut media is selected on the panel,
the media will be fed out in order to detect the end of the sheet.
Always make sure that the type of media specified on the panel
matches the media that is loaded.
NOTE
• Ink drying times differ according to the type of media. 30 sec-
onds is specified for Falcon Outdoor printers when shipped by
Mutoh but this needs to be specified to correspond to the
media. The ink drying time specifies the period from the end of
printing until the media is fed out (and roll media is cut) in
order to allow the ink to dry. For more detail, please refer to
"Function settings: Ink Dry Time" on page 122.
74
For roll media
Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Roll with Take-Up
: Lit
: Not lit