Command Set-Up (User Settings) - MUTOH RJ-6000 Series User Manual

To Receive Data from the Computer

Command Set-up (User Settings)

NOTE
• If values other than those set at the time of shipping from
Mutoh are used, be sure to refer to "Centronics Settings" or
"Network Settings" in the separate Functions Edition of the
User Guide.
Command Set-up (User Settings)
Each user will specify the online commands from the computer and the com-
mand conditions.
Commands
The type of command for verification is the MH-GL system (MH-GL/GL2, MH-
GL2, RTL-PASS).
MH-GL system commands (emulation of Hewlett-Packard printer com-
mands)
Settings at the time of shipping by Mutoh
Command
Initial position P1
Terminator Normal
Resolution 360 dpi
NOTE
• If values other than those set at the time of shipping from
Mutoh are used, be sure to refer to "Command Settings" in the
separate Functions Edition of the User Guide.
50
Item
RJ-6000 Series USER GUIDE Basic Edition