Changing And Confirming Settings While Printing; Procedure For Changing And Confirming Settings While Printing; Settings That Can Be Changed Or Confirmed While Printing; Pause Printing - MUTOH ValueJet VJ-1604W Operation Instructions Manual

6.1.5 Changing and confirming settings while printing.

6.1.5.1

Procedure for changing and confirming settings while printing.

Confirm that the printer is in one of the following conditions;
Step 1 :
 Receiving
 Converting
 Printing
Press the [Menu] key.
Step 2 :

The operation panel displays "Menu 1: PF Adjust".
Press the [+] key or the [-] key to change or confirm settings.
Step 3 :
Notes

Refer to: "Settings that can be changed or confirmed while printing" for more information on this topic.
6.1.5.2

Settings that can be changed or confirmed while printing.

Notes

The Print start menu is displayed only when the printer is warming up.

When you change a setting during operation, be sure to select "Backup" to save the setting that you
changed.

If the printer returns to Normal without selecting "Backup", the changed setting is not saved
Setup Item
PF Adjust -20 pulse to 0 to 20 pulse
Backup
Be sure to read and understand the safety warnings before handling the printer.

6.1.6 Pause printing

It is possible to pause during printing.
Notes

If pausing the printing operation, the output quality cannot be guaranteed.
Press the [-] key.
Step 1 :

The printer pauses the operation.

The operation panel displays "PrintRestart ==> ENTER".
To restart the printing operation, press the [ENTER] key.
Step 2 :
Setting
----
----
75
Operation Instructions ValueJet 1604W
Chapter 6 : Handling the printer
Description
Change the feed adjustment value
[ENTER] key: Save the changed setting.
[CANCEL] key: the printer returns to normal.
AP-77300 – Rev 1.1 -17/09/2009,