Table of Contents
Advertisement
Advanced settings
2
Advanced settings
Settings in this product can be changed to match your usage.
Only a part of functions is introduced here.
For usage functions of software, please refer to help or manual of software.
"Displaying Help or Manual" on page 11
Setting auto cut
It can be set to cut media automatically, when printing is done.
Setup is done to match the width, thickness and material of media.
Note
Depending on media, cutting cannot be done. In such a case, cut manually.
Steps
[1]
Launch the remote panel of VSM.
"Displaying remote panel" on page 9
[2]
Select anything but [Off ] in the [Media Initial] menu under the [Media Setting] tab.
[3]
Select [Auto Cut] in the [Output Mode] menu under the [Advanced Setting] tab.
Setting auto cut
38
Advertisement
Table of Contents
