Assigning Snmp Community Names And Access Levels - Paradyne iMarc SLV Operation Manual

2. Security and Logins

Assigning SNMP Community Names and Access Levels

The iMarc unit supports the SNMP protocol and can be managed by an SNMP
manager. SNMP manager access can be limited by:
„
„
Whenever an SNMP manager attempts to access an object in the MIB, the
community name must be supplied.
Procedure
To assign SNMP community names and access types:
See Configuring General SNMP Management in the
Reference
options.
2-10
Assigning the SNMP community names that are allowed to access the iMarc
unit's Management Information Base (MIB).
Specifying the type of access allowed for each SNMP community name.
1. Select the General SNMP Management options.
Main Menu→Configuration→Management and Communication→
General SNMP Management
2. Set the following configuration options, as appropriate.
To . . .
Assign SNMP community
names
Assign the type of access
allowed for the SNMP
community names
3. Save your changes.
for more information about General SNMP Management configuration
May 2003
Set the configuration option . . .
Community Name 1 and Community Name 2 to a
community name text, up to 255 characters in length.
Name 1 Access and Name 2 Access to Read or
Read/Write.
iMarc SLV Configuration
9000-A2-GB33-20