Paradyne iMarc SLV Operation Manual page 76

3. Status and Statistics
Table 3-7.
3-40
Test Status Messages (2 of 2)
Message
Packet Mode Loopback Active,
Network n
PLB Active, Interface
PVC Loopback Active, DLCI nnnn,
frame_relay_link
RLB Active, Interface
Send Pttn Active, DLCI nnnn,
frame_relay_link
Send Pttn Active, Interface
Test Call Active, ISDN Link Name
Tran. Pass-Thru Test Active,
Network n
May 2003
What It Indicates
A Packet Mode Loopback is active on the specified
DSL interface.
A Payload Loopback (PLB) is active on the
specified network, DSX-1, or ISDN PRI interface.
A PVC Loopback is active on the specified DLCI for
the frame relay link.
A network Repeater Loopback (RLB) is active on
the specified network or DSX-1 interface.
A selected Send Pattern test is active on the
specified DLCI for the specified frame relay link.
A Send Pattern test is active on the specified
interface.
This test cannot be activated on user data ports that
have Port Use set to Frame Relay.
A test call is active on the specified frame relay link,
the link being the ISDN Link Name assigned in the
ISDN Link Profile.
This message would only appear for units with the
ISDN DBM feature.
A Transparent Pass-Through Loopback test is
active on the specified SHDSL network interface.
9000-A2-GB33-20