Paradyne iMarc SLV Operation Manual page 101

Table 3-14. SLV Performance Statistics for Multiplexed DLCI (2 of 3)
9000-A2-GB33-20
Statistic What It Indicates
Inbound Dropped Total number of frames transmitted by the far-end device that
*
Frames were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
The SLV Delivery Ratio option (see the
Reference) must be enabled for these statistics to appear.
Above CIR*
Within CIR *
Between CIR&EIR *
Above EIR *
Inbound Dropped Total number of bytes transmitted by the far-end device that
Characters * were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
The SLV Delivery Ratio option (see the
Reference,) must be enabled for these statistics to appear. NA
appears instead of a statistical count if FDR/DDR (Frame
Delivery Ratio/Data Delivery Ratio) information is not being
received from the far-end device.
Above CIR *
Within CIR *
Between CIR&EIR *
Above EIR*
Latest RdTrip Latency Current round trip latency, measured in milliseconds, between
the iMarc unit and the device at the other end of the multiplexed
DLCI connection.
"--" appears if communication with the far-end device is not
successful.
* Only appears for iMarc units when the SLV Delivery Ratio option is enabled.
May 2003
32
–2), then the count starts over.
The number of frames transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
The number of frames transmitted by the far-end device that
were within the committed information rate, but were dropped
in transit.
The number of frames transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
The number of frames transmitted by the far-end device that
were above the excess information rate and were dropped in
transit.
32
–2), then the count starts over.
The number of bytes transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
The number of bytes transmitted by the far-end device that
were within the committed information rate, but were dropped
in transit.
The number of bytes transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
The number of bytes transmitted by the far-end device that
were above the excess information rate and were dropped in
transit.
3. Status and Statistics
iMarc SLV Configuration
iMarc SLV Configuration
3-65