Trap Event Log - Paradyne iMarc SLV Operation Manual

Trap Event Log

The Trap Event Log displays all traps stored in the SNMP trap event log. The
following log example describes the alarm conditions that will generate an SNMP
trap for a physical interface, and for the frame relay LMIs and DLCIs. These alarm
conditions also generate Health and Status messages seen on the
Status Messages
Trap Event Log Screen Example
Up to 12 trap events can be displayed on a screen, the most current first. Page
down (PgDn) to view less current trap events. When no trap events have been
logged, No Events in Log. appears in the Event column.
ASCII trap strings used to describe trap events are provided in the tables
contained in Standards Compliance for SNMP Traps in the
Reference.
9000-A2-GB33-20
on page 3-32.
Main Menu→Status →Trap Event Log
main/status/event_log
Device Name: Node A
Time of Day
12/11/02 08:22:41 Device configuration change.
12/11/02 08:21:48 Ethernet up.
12/11/02 08:21:48 Sync Data Port S01P1 link up.
12/11/02 08:21:48 Network T1 link up.
12/11/02 08:21:46 Sync Data Port S01P1 link down.
12/11/02 08:21:46 Network T1 link down.
12/11/02 08:21:46 RMON database reset to defaults.
12/11/02 08:21:46 Ethernet link down.
12/11/02 08:21:46 Network T1 up.
12/11/02 08:21:46 Network T1 down due to OOF.
12/11/02 08:21:46 Unit Reset.
--------------------------------------------------------------------------------
ESC for previous menu
Refresh PgUp PgDn
May 2003
TRAP EVENT LOG
Total Trap Events:
Event
MainMenu
3. Status and Statistics
Health and
9128-II
12/11/2002 09:13
11
Exit
iMarc SLV SNMP
3-91