Configuring Snmp Trap Managers And Trap Dial-Out - Paradyne iMarc SLV 9126 Installation Instructions Manual

Configuring SNMP Trap Managers and Trap Dial-Out

Once the iMarc unit is connected to the network, SNMP trap managers, SNMP traps,
and trap dial-out can be configured.
Procedure
1. Select SNMP Traps.
Main Menu → Configuration → Management and Communication →
SNMP Traps
2. Configure the following:
— Enable SNMP Traps.
— Identify the total Number of Trap Managers.
— Specify the IP address of the NMS(s) to which traps will be sent.
— Specify the network Destination for the Trap Manager(s).
— Select desired trap categories.
— Enable Trap Dial-Out, if desired.
3. Save the configuration.
4. Return to the Main Menu.
20