Dbm Interface Status - Paradyne iMarc SLV Operation Manual

3. Status and Statistics
The following information is available for DSX-1 interface time slots (D01– D24):

DBM Interface Status

When an ISDN DBM is installed, these interface statuses appear when DBM
Interface Status is selected from the Status menu.
DBM Interface Status Screen Example
Select the NextLink and PrevLink function keys to move forward or backward
through the frame relay link that can be selected. If the selected frame relay link is
a multilink aggregate link, select the ConstLinkStatus function key to see the
status for selected constituent links.
For a multilink aggregate link, Multilink Constituent Link appears under Link so a
specific constituent link can be selected. Otherwise, the line is blank. In addition,
the Most Recent Cause Value, Previous Cause Values, and Remote Call ID do not
appear for a multilink aggregate frame relay link.
3-50
The Cross Connect
Status Field (bottom) . . .
blank
Net1/tt
Net1/ttr
Main Menu→Status→DBM Interface Status
main/status/dbm
Device Name: Node A
Line Status:
Link:
Multilink Constituent Link:
Link Operating Mode:
Call Status:
Most Recent Cause Value:
Previous Cause Value 1:
2:
3:
4:
Maximum Link Rate (Kbps):
Negotiated Rate (Kbps):
ISDN Channel:
Remote Call ID:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Refresh
May 2003
Indicates the . . .
The time slot is unassigned.
Network interface 1, time slot (tt) is assigned to DSX-1 time
slot (01 to 24) using Clear Channel.
Network interface 1, time slot (tt) is assigned to DSX-1 time
slot (01 to 24) using Robbed Bit Signaling (r).
DBM INTERFACE STATUS
Call Rejected - HQ_Site: Disabled
Colorado
Colorado-1
Active
Connected
Call Awarded and Being Delivered In Est Chnl-7
None
None
None
None
64K (Configured)
64K
B1
8135302000
NextLink PrevLink
9128-II
5/26/2000 23:32
MainMenu Exit
ConstLinkStatus
9000-A2-GB33-20