Paradyne iMarc SLV Operation Manual page 75

Test Status Messages
These test messages appear in the right column of the System and Test Status
screen. You have the option of allowing the test to continue or aborting the test.
See
start and stop them.
Table 3-7.
9000-A2-GB33-20
Chapter 5, Troubleshooting, for more information on tests, including how to
Test Status Messages (1 of 2)
Message
511 Pattern Test Active, Network n
BER Loopback Active, Network n
CSU Loopback Active, Network n
DCLB Active, link
DCLB Active, Port-2
DSU Loopback Active, Network n
DTE External LB Active, Port-n
DTE Init. Ext LB Active, Port-n
DTPLB Active, Port-n
Lamp Test Active
Latching DSU LB Active, Network n A DSU Loopback is active on the specified DDS
LLB Active, Interface
Monitor Pttn Active, DLCI nnnn,
frame_relay_link
Monitor Pttn Active, Interface
Net Initiated CSU Loopback Active,
Network n
Network Initiated ISDN BRI Test
Active
No Test Active
NonLatching DSU LB Active,
Network n
May 2003
What It Indicates
A 511 Pattern test is active on the specified SHDSL
network interface.
A BER Loopback is active on the specified DSL
interface.
A CSU Loopback is active on the specified DDS
interface.
A Data Channel V.54 Loopback (DCLB) is active on
the specified frame relay or PPP link, or Port-2.
A DSU Loopback is active on the specified DDS
interface.
An external DTE Loopback is active on the user
data port.
An external DTE Loopback is active on the user
data port.
A Data Terminal Payload Loopback (DTPLB) is
active on the user data port.
The Lamp Test is active, causing the LEDs on the
faceplate to flash on and off.
interface.
A Line Loopback (LLB) is active on the specified
user port, network, DSX-1, or ISDN PRI interface.
A selected Monitor Pattern test is active on the
specified DLCI for the specified frame relay link.
2
A Monitor Pattern test is active on the specified
interface.
This test cannot be activated on user data ports that
have Port Use set to Frame Relay.
A network-initiated CSU Loopback is active on the
specified DDS interface.
An ISDN test has been started by the ISDN BRI
network and it is currently active.
No tests are currently running.
A DSU Loopback is active on the specified DDS
interface.
3. Status and Statistics
3-39