Tests Available - Paradyne iMarc SLV Operation Manual

Tests Available

The following are all the tests available to iMarc SLV units. Which tests are
available on a particular unit depend on the model and its interfaces. For example,
if the unit does not have the ISDN DBM feature, ISDN Call does not appear with
the ISDN PVC Tests. PRI Physical Tests only appears when an ISDN PRI
DBM is installed.
PVC Tests menu selections are suppressed when no PVCs have been configured
on the interface. Check that both ends of the cables are properly seated and
secured.
Tests can be commanded from the OpenLane 5.x management system using its
Diagnostic Troubleshooting graphical interface, as well as from the menu-driven
user interface.
9000-A2-GB33-20
Test Menu Example
main/test
Device Name: Node A
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
May 2003
TEST
Network PVC Tests
Data Port PVC Tests
T3 User Port PVC Tests
ISDN Call/PVC Tests
Network ATM Loopback Tests
Network Physical Tests
Data Port Physical Tests
T3 User Port Physical Tests
DSX-1 Physical Tests
PRI Physical Tests
IP Ping
Lamp Test
Abort All Tests
5. Troubleshooting
9xxx
11/26/2002 12:36
MainMenu Exit
5-19