Error Handling And Secure Printing - Oce VarioPrint 6000 MICR series User Manual

Error handling and secure printing

Error handling and secure printing
Introduction
TheOcé VarioPrint® 6000 MICR series is equipped with very efficient and reliable error
recovery. Some printing environments, however, require that multiple copies be avoided.
For example, in transactions involving the printing of valuable documents such as cheques.
In such an environment, you can enable the secure printing functionality.
Secure printing means that automatic error recovery is suppressed. Errors are recovered
by the server. All pending pages in the printer will be deleted. An error results in a stack
eject. This means that it is the responsibility of the operator to restart the job manually
on the correct page, in case of an error. By default, secure printing is disabled. In the
Settings Editor, you can enable secure printing in the IPDS transaction printing setups.
PCL transaction printing does not support secure printing.
This section describes the difference between the default error handling and error handling
with secure printing enabled.
Note:
You can enable secure printing in IPDS transaction printing setups only.
Note:
When you enable secure printing, the intermediate check print and the sample sheet
interval are automatically disabled.
Error handling with secure printing in IPDS
The table shows what happens when an error occurs during a print job transaction with
secure printing. Pages that are copied to the memory of the controller are deleted from
the system. The operator must send these missing pages to the printer as a (new) print
job transaction.
32 Chapter 3 - Secure printing