Windows Properties; Auto Start - Psion Teklogix 7535 User Manual

Font Change
When "Font Change" is set to "Y", operators at the User level can change the font
size of their 7535/7530s. Pressing <CTRL> <ALT> <F> cycles through the
available fonts.
Exit
If this parameter is set to "Y", an operator with user level security can exit Tekterm
by pressing <ALT> <F4>. If "Exit" is set to "N", the operator cannot exit Tekterm.

6.16.5 Windows Properties

04
Title Bar
Menu Bar
Block Move
Title Bar
When you set this parameter to "Y", a title bar is displayed at the top of a window
specifying the name of the application and the purpose of the window.
Menu Bar
Setting this parameter to "Y" displays a horizontal bar below the title bar that
contains a set of menus – Mode, Keyboard and Apps. You can tap on a menu name
in the Menu Bar for quick access to a list of parameters to help with such activities
as changing fonts, moving the cursor around the screen, panning the contents of the
screen and working with TESS and ANSI applications.
Block Move
Enabling (setting to "Y") "Block Move" prevents the screen contents from moving
when the Title Bar is visible.

6.16.6 Auto Start

"Auto Start" determines whether or not Tekterm is automatically launched when the
7535/7530 is reset. If this parameter is set to "N", Tekterm will not be launched
when the hand-held resets.

Windows Properties

N
N
Y
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 6: Tekterm Application
Windows Properties
Range
Y/N
Y/N
Y/N
259