Psion Teklogix 7535 User Manual page 169

This feature is used rarely. It is used when the order of channel switching needs to be
tightly controlled. The values in the "Channel" column are completed for you with
the enabled channels when this dialog box is opened. For each corresponding
enabled channel, the "List" column contains "0,0,0,0,0,0,0,0" values by default.
If communication quality falls below 46%, only the channels entered in the Manual
Switch Table are considered for channel switching. The channel search is carried out
in the order in which the channels were entered in the table.
To configure channel switching order for a particular channel:
• Highlight the channel you want to edit, and tap on the Edit Channel
List button.
Editing The Channel List
Only those channels that are enabled are displayed in the dropdown menus in the
Edit Channel List dialog box. The allowable values range from 0 to 20.
• Tap on the arrow next to dropdown menu to scroll through the available
channels. Highlight the value you want to assign.
• Once you've assigned the switching order, tap on the OK button to close
the dialog box.
The channel list is added to the selected channel in the Manual Switch Table
dialog box.
Figure 5.67 Editing Channel List
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 5: Configuration
Channel Tab
143