Psion Teklogix 7535 User Manual page 183

Addendum
Important: Before "Addendum" can take effect, the "Short Code" parameter
(see page 153) must be enabled.
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options:
Depending on the value chosen for this parameter, an addendum is recognized
or ignored.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When "Addendum" is set to Disabled
addendum. If this parameter is set to Optional
an addendum and if one exists, appends it to the main bar code. When the
parameter is set to Required
without an addendum.
Prefix/Suffix
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press
the key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the <ESC> key in this dialog box resets the data to zero.
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Press the
key you want to insert in the dialog box attached to this parameter. The
ASCII/Unicode key value of the keypress is displayed.
Pressing the <ESC> key in this dialog box resets the data to zero.
Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added.
Note: The appended character is treated as any other keyboard character. For
example, if <BKSP> is pressed, the usual action for that key is per-
formed. If your hand-held is operating with the Psion Teklogix ANSI emu-
lation application, the hand-held transmits the escape sequence
associated with the function immediately after the bar code data.
Disabled, Optional
the scanner does not recognize an
,
the scanner does not accept the main bar code
,
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 5: Configuration
and
the scanner searches for
,
EAN 13
.
Required
157