Psion Teklogix 7535 User Manual page 324

Chapter 6: Tekterm Application
Fields
Enter To F0
The <ENTER> key normally enters data into a field and moves the cursor to the
next field. However, some applications require that the <ENTER> key start a
transmission from the 7535/7530. When enabled (set to "Y"), this parameter causes
the <ENTER> key to be interpreted as <F0> which starts a transmission.
Enter On Arr
When this parameter is enabled (set to "Y"), the arrow keys can be used to complete
data entry into a field.
Video
Blink
The value assigned to this parameter specifies the actual video attributes to be
assigned to fields created with the "Blink" TESS attribute – that is, "BLNK" (blink),
"ULIN" (underline), "REV" (reverse) or "NONE" (normal).
Bold
The value assigned to this parameter specifies the actual video attributes to be
assigned to fields created with the "Bold" TESS attribute – that is, "BLNK" (blink),
"ULIN" (underline), "REV" (reverse) or "NONE" (normal).
Reverse
The value assigned to the "Reverse" parameter specifies the actual video attributes
to be assigned to fields created with the "Reverse" TESS attribute – that is, "BLNK"
(blink), "ULIN" (underline), "REV" (reverse) or "NONE" (normal).
All Fld Video
Usually, the video attributes apply only to the text that is in an entry field. When this
parameter is enabled (set to "Y"), the entire field (including blanks) takes on the
video attributes. Some systems use this option to identify empty entry fields with
reverse video.
298
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Video
06
Blink
Bold
Reverse
Range
BLNK see text
ULIN see text
REV see text