Troubleshooting; Portable Docking Module (Pdm); Network Link Unsuccessful; 7535/7530 Led Does Not Light When Docked - Psion Teklogix 7535 User Manual

Hand held micro-computer with portable docking module
Hide thumbs Also See for 7535:
Table of Contents

Advertisement

7.8.6 Troubleshooting

The indicators, applications and drivers required to use and monitor the docking
station are installed on the 7535/7530 – no indicators or applications are present on
the docking station itself.
7.8.6.1

Network Link Unsuccessful

If a network link fails, the 7535/7530 application alerts the operator that the link was
unsuccessful.
7.8.6.2

7535/7530 LED Does Not Light When Docked

Check that the quad dock has power – is the Power LED on the quad
dock illuminated?
Try inserting the 7535/7530 in another slot in the quad dock.
Check for dirt or contamination on the docking contacts at the bottom of the
7535/7530. Wipe the contacts with a damp cloth if necessary.
Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth
if they appear to be dirty or discoloured.
Check that the pogo pins are not bent or damaged.
Remove and reinsert the 7535/7530 in the cradle, and check that the latch is
holding the unit in place (the pogo pins must be compressed for proper
contact).
Make certain that the battery installed in the 7535/7530 is not defective.

7.9 Portable Docking Module (PDM)

Warning:
The mains power cord for the DC adapter shall comply with
national safety regulations of the country where the equipment
is to be sold.
The Portable Docking Module (PDM) clips onto the base of the 7535/7530 and is
most often used to charge the 7535/7530 battery when a desktop charger is not
convenient. The PDM also offers additional communication ports, making it useful
for upgrading software in the 7535/7530 from a USB-equipped laptop computer.
Figure 7.2 on page 337 illustrates the connectors on the PDM.
Align the pins on the PDM with the connectors on the base of the 7535/7530.
Gently snap the PDM into place on the base of the unit. Figure 7.1 on page 336
provides a visual representation of how to secure the PDM.
Chapter 7: Peripheral Devices & Accessories
Psion Teklogix 7535/7530 Hand-Held Computer User Manual

Troubleshooting

335

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7530

Table of Contents