Tests - Psion Teklogix 7535 User Manual

H Match Chr
This parameter enables hidden field matching and defines the character that identifies
hidden field match data from the host. Field matching allows the host to pre-load
data into an entry field that is compared with the user's input. The 7535/7530 beeps
if the entered data does not match. Hidden field matching means that the data to be
matched is not displayed in the entry field.
Enter the decimal value for the ASCII character that will be used by the host to
identify hidden match field data. Enter 0 (zero) to disable this feature.
Note: Another method of field matching is available directly through the
TESS data stream.
Fill Chr
This parameter specifies the character that identifies empty entry fields. Enter
the ASCII decimal equivalent of this character. The most commonly used
characters are:
_ (underline)
. (period)
Note: 7535/7530s in some systems may use the "space" character with the host
using reverse video attributes to mark entry fields.
Upper Case
When this parameter is enabled (set to "Y"), lowercase input is converted
to uppercase.

6.19.2.4 Tests

05
AutoRep Fn
AutoRep T/O
AutoRep Fn
This parameter determines which function key is sent to the host in auto reply mode.
The value represents the number of the function key – not the ASCII decimal
equivalent. After sending this key, the unit locks and waits for the host to unlock the
7535/7530. To disable "AutoRep Fn", set the "AutoRep T/O" parameter to zero.
Enter 95
Enter 46
Tests
7
5
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 6: Tekterm Application
Range
0..63
0..255
Tests
291