Changing Network Properties; Assigning The Ip Address; Summit Client Utility (Scu) For 802.11B/G Radio - Psion Teklogix 7545 User Manual

Chapter 2: Basic Checkout

Summit Client Utility (SCU) For 802.11b/g Radio

2.7.3.3 Changing Network Properties

To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Tap on the Properties button.
• Make any necessary changes in the Wireless Properties dialog box, and press
[ENTER] to save the changes.
2.8 Summit Client Utility (SCU) For 802.11b/g Radio
This section describes the Summit Client Utility (SCU). The SCU provides the utilities you
will need to configure the 802.11b/g Compact Flash radio module so that it can communi-
cate through a wireless LAN effectively and securely.
2.8.1

Assigning The IP Address

Before launching the SCU, you need to configure how the IP address will be obtained. If
your network is not using a DHCP server, you will need to assign an IP address.
1. Tap on Start>Settings>Network and Dial-up Connections. (If the Start Menu isn't
displayed in the taskbar, press [BLUE] [0] to display it.)
If you're using the keyboard, press [BLUE] [0] to display the Start Menu. Use the
[DOWN] arrow key to highlight Settings. Press the [RIGHT] arrow key to display the
sub-menu. Highlight Network, and press [ENTER].
2. Choose the Summit WLAN Adapter icon to open the 802.11 Wireless LAN Set-
tings window. In Figure 2.11, this icon is labelled SDCCF10G1.
Figure 2.11 Summit WLAN Adapter Icon
28 Psion Teklogix 7545 Hand-Held Computer User Manual
Preliminary Draft 3