Installation: Installing The 7535/7530 As A Device On The Pc - Psion Teklogix 7535 User Manual

Appendix D: USB Setup Application

Installation: Installing The 7535/7530 As a Device On The PC

D.1.3 Installation: Installing The 7535/7530 As a Device On The PC
1. Install Dialog Box:
The .sys files you selected are copied to the backup directory. If an
unknown error occurs during the backup, you are asked whether you'd
prefer to cancel the install or continue with the process. The
wceusbsh.inf and usbstor.inf files are updated.
2. If you indicated that the wceusbsh driver should be installed, the
Install dialog box appears again. The USB Setup application will
attempt to install the drivers immediately. This will succeed only if a
valid USB connection to the device that is running Windows CE .NET
exists.
• If the install fails due to an unknown error, the install for this particular
driver is aborted.
• If the install fails because there was an inappropriate USB connection, there
are two possibilities:
• An appropriate USB connection was never established between the PC
• An appropriate USB connection exists between the PC and the
• A window is displayed where you can tap on <Cancel> to abort the
wceusbsh driver installation and continue. It also contains instructions to
boot your device into Windows CE .NET and establish a USB connection
between the device and the PC. When you create the appropriate connec-
tion, Windows automatically installs the device drivers. The 'Found New
Hardware' wizard may appear. Your only interaction with this window is to
click on the <Finish> button.
• If this is the first appropriate connect between the device and the PC –
i.e., there was no previous devnode for the device in the system – the
<Continue> button is activated as soon as the connection is made. Where
there was a devnode present in the system and it has been marked for rein-
stall, the <Continue> button will not become active until Windows has
D-4
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
and the 7535/7530 running Windows CE .NET. In this case, when an
appropriate USB connection with this device exists, Windows will auto-
matically attempt to install the device driver.
7535/7530 running Windows CE .NET, but it has since been severed.
Windows may or may not attempt to automatically install the device
drivers on the next appropriate USB connection.