Trap Destination Tab; Enabling Authentication Traps; Adding A Destination - Psion Teklogix 7535 User Manual

5.11.3 Trap Destination Tab

A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running
on the managed node. This option allows you to define where the report will be sent.

5.11.3.1 Enabling Authentication TRAPS

Enabling Enable Authentication TRAPS allows authorization traps to be sent when
a failure is detected (e.g., an SNMP message received with a bad community name).

5.11.3.2 Adding A Destination

To add a new destination:
• Choose the Add button.
• Type a destination in the text box provided, and press <ENTER>.
Figure 5.92 Trap Destination Tab
Figure 5.93 Adding A Trap Destination
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 5: Configuration

Trap Destination Tab

199