Psion Teklogix 7535 User Manual page 50

Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio In The Unit
4. Wireless Information Tab
The options under this tab display existing networks to which you can
connect, and it allows you to add a new network or modify the settings
for an existing network.
Note: Configure button – To change the settings in an existing network, high-
light the network you want to modify, and choose the Configure button to
display the Wireless Properties dialog box.
Connect button – To force connection to a specific, existing network,
highlight the network to which you want your 7535/7530 to connect, and
choose the Connect button.
This tab lists available networks – any access points that are broadcasting
an SSID, and it lists preferred networks – networks that you have config-
ured. Since access points are generally secure, they will most likely not
be listed here. By default, 7535/7530 attempts to connect to preferred net-
works. This behaviour can be changed by enabling Automatically connect
to non-preferred networks in the Advanced dialog box (page 30).
•
24
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Figure 2.8 Wireless Information Tab
To add a new configuration, tap on the Add New button. A blank Wire-
less Properties dialog box is displayed.