USB S
ETUP
D.1 USB Setup
The USB Setup application (PN 1000997) is used to update a Windows PC so that it
can connect to a Psion Teklogix 7535/7530.
System Requirements
•
Windows® 2000 or XP
•
ActiveSync 3.5 or later
The two driver classes that control USB communication are usbstor (for commu-
nication with a device running BooSt) and wceusbsh (for communication
through ActiveSync with a device running Windows CE .NET). These drivers must
be updated with 7535/7530-specific information so that the 7535/7530 can be rec-
ognized by your PC.
The install program:
•
updates copies of the device installation scripts usbstor.inf and
wceusbsh.inf with Psion Teklogix-specific information,
•
sets up a USB connection between the PC and the 7535/7530, and
•
installs the 7535/7530 as a device on your PC. This may require notifying
the PC OS that the device should be reinstalled and then reconnecting the
USB device.
D.1.1 Launching The Application
The log file is initialized and the program introduction is written to it.
A
PPLICATION
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
A
PPENDIX
D
D-1