Scan Led Indicators; Navigating In Windows Ce; Navigating A Touchscreen - Psion Teklogix 7530 G2 Quick Reference Manual

Hand-held computer

Hide thumbs Also See for 7530 G2:

Table of Contents

• Hold the scanner closer for bar codes with bars that are

close together.

2.7.2 Scan LED Indicators

The 7530 G2 scanner LED (the lower-left LED) indicates whether or

not your scan is successful. Refer to "LEDs" on page 31 for details.

A bar code icon appears on the screen during a scan. While the scan-

ner beam is active, the onscreen message states – SCANNING. If the

scan is successful, the bar code data is displayed on the screen until

the scan button (or pistol trigger) is released.

Graphic user interfaces like Windows CE for portable devices and

desktop Windows (2000, XP, etc.) utilize 'point and click' naviga-

tion. On 7530 G2 touchscreens, the 'point and click' action is

accomplished by tapping the stylus on the touchscreen rather than

using a mouse.

An equivalent keyboard shortcut is also available for every 'point

and click' action. Actions can be performed using any combination

of keyboard shortcuts or touchscreen tapping

Note: If the touchscreen is not registering your screen taps accu-

rately, it may need recalibration. Refer to "Calibrating The

Touchscreen" on page 30.

The 7530 G2 is equipped with a stylus – a pointing tool that looks

like a pen – stored in a slot at the top of the unit. The stylus is used to

select objects on the touchscreen.

Note: To prevent damage to the touchscreen, use only the stylus

(pen) supplied with your 7530 G2.

Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide

Table of Contents