Scanner - Psion Teklogix 7535 User Manual

Chapter 6: Tekterm Application

Scanner

SO CRC
When this parameter is enabled (set to "Y"), a CRC16 value is appended to the
serial output message.
Also, when this parameter is enabled (set to "Y"), for each control character in
the serial output stream, a DLE is inserted to precede that character. The control
character is replaced with its 1's complement.
6.19.2.6 Scanner
Cont Nxt Fld
This parameter only applies to string entry data. When enabled (set to "Y"), this
parameter allows bar codes that are longer than the field length to continue in the
next field.
If "ContNxtField" is disabled (set to "N"), OFF data will flow into the next field.
Append Enter
When enabled (set to "Y"), "Append Enter" causes an <ENTER> code to be
appended to the bar code. The <ENTER> code completes the entry of the bar code
and moves the cursor to the next field.
Append F0
When enabled (set to "Y"), this parameter causes an <F0> code to be appended to
the bar code. The <F0> code completes the entry of the bar code data in the field.
296
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
05
Scanner
Cont Nxt Fld
Append Enter
Append F0
Mixed AIAG
Rjct if Alpha
Beam Lockout
Range
Y Y/N
Y Y/N
Y Y/N
N Y/N
N Y/N
N Y/N