Anchor View; Emulation - Psion Teklogix 7535 User Manual

Chapter 6: Tekterm Application

Anchor View

6.19.2.8 Anchor View
When enabled (set to "Y"), this parameter locks the display at a defined location on
the screen, preventing it from shifting when the cursor is moved. The "x origin" and
"y origin" coordinates specify where the screen origin, the upper left corner of the
screen, will be fixed.
x origin and y origin
The "x origin" parameter is used to specify the column to which the upper left
corner of the screen will be anchored. The "y origin" parameter is used to specify
the row coordinate to which the screen will be anchored.

6.19.2.9 Emulation

Note: These parameters are only accessible when one of the following TESS
'Host Conn' options is selected: '2392/Telnet', '3274/Telnet' or
'5250/Telnet'.
2392/Telnet Emulation
Send CR with FKEY
A function key press generates a string of text to be sent back to the host. If this
parameter is enabled, a carriage return is appended to the function key.
300
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Anchor
05
x origin
y origin
Emulation
05
Send CR with Fkey N
Features
Range
1 1..24
1 1..80
Range
Y/N
» see text