Ibm 5250 Emulation Keys; Data Entry - Psion Teklogix 7535 User Manual

6.6.4 IBM 5250 Emulation Keys

The following keys allow the Psion Teklogix computer to better emulate the
functions of a true IBM 5250 terminal.
Note: These keys are active at all times in TESS applications.
Key Function Key Sequence
Field Advance <BLUE> <O>
or Tab (PgDn key)
Field Back- <BLUE> <I>
space (PgUp key)
<BLUE> <P>
Field Exit
(End key)
<BLUE> <N>
Home
(Home key)

6.6.5 Data Entry

The 7535/7530 accepts data until the operator presses a key that sends a
transmission to the host computer. The following actions cause the 7535/7530 to
transmit:
• Pressing a function key or the <ENTER> key (which is considered to be
<F0>) causes the hand-held to transmit.
• Completing data entry into a "transmit on entry" field also causes the
hand-held to transmit.
There are several ways to configure the 7535/7530 to complete a data field:
• Pressing <ENTER> after entering data.
• Pressing a function key after entering data.
• Pressing an arrow key after entering data.
• Filling an auto-tab field.
Cursor moves to the first position in the next
input field. If already in the last field, the cursor
moves to the first input field on the screen.
Cursor moves to the beginning of the current
field. If already in the first position, the cursor
moves to beginning of the previous field.
Current field is cleared from the cursor position
to the end of the field, and the cursor moves to the
next input field.
Cursor moves to the first input field on the
screen.
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 6: Tekterm Application

IBM 5250 Emulation Keys

Cursor Movement
229