Psion Teklogix 7535 User Manual page 413

• If necessary, tap on the <Browse> buttons to select different paths for the
inf files.
3. Device Driver Install Selection Dialog Box:
You can choose to have the device drivers installed immediately by
selecting the check box, or you can leave the check box blank and
Windows will install the 7535/7530 the next time it is connected. It is
recommended that the device be installed immediately.
• Select the drivers you want to update – wceusbsh and usbstor.
• Tap on the <Next> button.
Note: None of the drivers are updated by default. To complete the process, you
must establish USB connections.
4. Device Driver Backup Selection Dialog Box:
The USB Setup application will attempt to back up the driver .sys
files before attempting the installation. It specifies which files it will try
to back up and the location to which it will back them up.
Note: Both drivers are selected for backup by default. The backup directory is
<system directory>\drivers\ptxBackup.
Pre-Installation: Updating usbstor.inf And wceusbsh.inf
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Appendix D: USB Setup Application
D-3