Features - Psion Teklogix 7535 User Manual

Chapter 6: Tekterm Application

Features

AutoRep T/O
This parameter determines the time (in seconds) between the 7535/7530 unlocking
and the next transmission of the function key specified by the above parameter.
A value of zero disables auto reply mode.
6.19.2.5 Features
Printer
This parameter enables and disables the pins in the serial port used for printers or
other external devices.
Binary print
When this parameter is enabled (set to "Y"), the page displayed on the 7535/7530
computer is spooled as is, except for trailing white-space removal. When disabled
(set to "N"), each line of the page displayed on the hand-held is preceded by a
linefeed (LF) and followed by a carriage return (CR).
Queuing
This parameter enables and disables queuing mode (see "Queuing Mode" on
page 236). It also enables TESS procedures to be loaded into the 7535/7530. This
parameter should be enabled if local procedures and the ability to switch between
hosts within a TESS session are required. Changes to this parameter take effect only
after the 7535/7530 is reset.
292
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
05 Features
Printer
Binary print
Queuing
Lcl Process
Send Mile
Next X
Kbd Locked
Remap Passthru
Disable Beep
Serial
Range
Y Y/N
N Y/N
Y Y/N
Y» see text
N Y/N
N Y/N
N Y/N
N Y/N
N Y/N
» see text