Radio Parameters - Psion Teklogix 7535 User Manual

Chapter 6: Tekterm Application

Radio Parameters

Warning:
Note: Parameters can also be remotely modified using SNMP. Refer to "SNMP
(Simple Network Management Protocol) Setup" on page 194 for details.
• At the startup 'Display' menu, type 'a' to display the 'Parameters' menu.
01
More Parameters
Security
Display
To open the 'More Parameters' menu:
• Double-tap on 'More Parameters' or press <F1>.

6.15 Radio Parameters

Important:
Note: A Narrow Band radio is available for 7530 hand-held. For details on set-
ting up this radio, refer to "Narrow Band Radio Setup — 7530 Only" on
page 137.
For 7535/7530s equipped with 802.11 radios, follow the directions following.
252
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Parameters should not be altered without a clear understanding of
how they operate. Parameters that are incorrectly set can increase
response time or cause communication difficulties. Generally,
parameters are configured for each site during installation.
Parameters
02
Parameters
Radio
System
Scanner Ctrl Panel
View Manager
Applications
Ports
Network
Radio parameters should not be changed from their factory
settings without a clear understanding of your system.
» see page 251
Supervisor see page 250
» see page 251
»
»
»
»
»
»
»
Range