Narrow Band Radio Setup - 7530 Only; Info Tab - Psion Teklogix 7535 User Manual

5.9 Narrow Band Radio Setup — 7530 Only
Keep in mind that the Narrow Band icon is only visible in the 7530 Control Panel
when a Narrow Band radio is installed in the unit. Note too that this radio is not
available for 7535 hand-helds.
• In the Control Panel, tap on the Narrow Band Radio icon.

5.9.1 Info Tab

In the Narrow Band Radio dialog box, the Info tab displays information about the
radio – it cannot be edited.
The Power information in this screen indicates the power of the radio installed in
the unit – 0.5 or 1.0 W. The "Serial Number" is the identifier for the radio and is
used by the protocol when the "Auto Radio Address" parameter is enabled. The
"CIS Data" (Card Information Structure) is manufacturer information describing the
PC Card installed in the 7535/7530. "DSP x.x / FPGA 0xNN" indicates the
firmware revision of the radio's DSP (x.x) and FPGA (0xNN) where x.x and NN
represent actual revision numbers.
Statistics Screen
• Tap on the Statistics button to display the Protocol Statistics screen.
Narrow Band Radio Setup — 7530 Only
Figure 5.61 Narrow Band Information
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Chapter 5: Configuration
137