Selecting Copy Options For A Dfa Finishing Device - Xerox D95 User Manual

2-Sided Copying
Original Type
Lighten/Darken
The features displayed on the main Copy screen vary depending on how the main
Copy screen is configured by the administrator.
6. Enter the quantity.
7. Press Start.
Selecting copy options for a DFA finishing
device
If your machine has an optional, third-party, Document Finishing Architecture (DFA)
device attached, then this profile feature is available, and specific copy options may be
selected for a job.
Prior to physically attaching the DFA device to the machine, device profiles are created.
The profiles represent the characteristics of your finishing device.
Note
Refer to the third-party customer documentation for information on setting the profile
values for the specific DFA device attached to the machine.
A profile for the job can be selected from either the print server, the print driver on your
computer, or the machine's User Interface. Depending on the DFA device, a maximum
of twelve profiles are available.
1. Place your original documents either in the document feeder or on the document
glass.
2. Press the Services Home button.
3. Select Copy on the Services Home screen.
4. Select the Output Format tab.
a) Select the DFA Finisher.
The DFA Finisher Profile screen displays.
b) From the displayed list, select the profile for the job.
If the device is an e-binder, select the binding position.
c) Select Save.
d) Select the desired Face Up/Down Output option.
5. From the Copy screen, select the desired features/options.
The features displayed on the main Copy screen vary depending on how the main
Copy screen is configured by the administrator.
6. Enter the quantity.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
Copy
4-3