Xerox D95 User Manual page 322

Perfect Binder (D110/D125/D136 with integrated controller)
053-405
Cause: Trimmer waste tray is full
Remedy: Empty the tray.Follow the instructions displayed on the system UI to restart
your print job.
053-406
Cause: Book stacker tray is full
Remedy: Empty the tray.Follow the instructions displayed on the system UI to restart
your print job.
053-407, 053-408
Cause: Cutter blade is nearing or at end of life
Remedy: Contact your service representative.
053-409
Cause: Adhesive level is low or empty
Remedy: Add more adhesive pellets to the adhesive filling tray.
053-410
Cause: Cutter blade is nearing or at end of life
Remedy: Contact your service representative.
053-411
Cause: Trimmer waste tray is full
Remedy: Empty the tray.
053-412
Cause: Adhesive level is low or empty
Remedy: Add more adhesive pellets to the adhesive filling tray. Follow the instructions
displayed on the system UI to restart your print job.
053-900, 053-901, 052-902, 052-903, 052-904, 052-905, 052-906, 052-907, 052-908,
052-909, 052-910, 052-911, 052-912, 052-913, 052-914, 052-915, 052-916
Cause: Paper jam
Remedy: Remove the jammed paper; follow the instructions displayed on the system
UI to restart your job.
053-922
Cause: Cannot detect the size loaded in the cover inserter tray or the amount loaded
in the tray exceeds maximum quantity.
Remedy: Remove contents from the tray; reload media into the tray, and ensure that
the correct tray programming information is reflected on the system's UI.
054-210, 054-211, 054-212, 054-213, 054-214, 054-215, 054-216, 054-217, 054-218,
054-219, 054-220, 054-221, 054-222, 054-223, 054-224, 054-225, 054-226, 054-227,
054-228, 054-229, 054-230, 054-231, 054-232, 054-233, 054-234, 054-235, 054-236,
21-30 User Guide