Xerox D95 User Manual page 289

Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-960
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-964
Cause: HCS sensor failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-965
Cause: Stacker height limit or full detection fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-966
Cause: Stacker height limit or full detection fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-967
Cause: The HCS detects paper still remaining on stacker cart after the front door was
opened/closed.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Open the HCS front door.
Remove any paper from the stacker cart.
Xerox ® D95/D110/D125/D136 Copier/Printer
User Guide
High Capacity Stacker (HCS)
20-23